CGMMSTICK1 – Maximite
This product is sold and shipped by CircuitGizmos in the US.
It is not Sold, Stocked, or Supported by Dontronics, and can only be purchased directly from CircuitGizmos. That is why the stock level is showing zero.
If you click on the link, it will take you to the sales page, where you will find additional information on US, and world wide shipping.
This is currently the only fully built up, 100% MaxiMite Computer-Microcontroller available on the market, as all others are in kit form.
SimmSticks and MaxiMite CGMMSTICK1 Compatibility:
SimmSticks are pretty much pin compatible with the MaxiMite CGMMSTICK1, and currently Dontronics has sellout specials of $1 for 1 inch, and $2 for 2 inch blank SimmStick boards. Those available include LEDs & Switches, Relays Boards, Bus Expansion, I2C Expansion, Power Supplies, Proto Boards, and also male and female, straight and right angle, 30 pin headers.
See: http://www.dontronics-shop.com/simmstick-and-related.html
Maximite-type computer/controller for solderless breadboards
$29.99 US dollars.
Run BASIC programs to interface to your electronics
The Maximite is a brilliant little computer design created originally by Geoff Graham geoffg.net that runs BASIC.
The CGMMSTICK incorporates a lot of the Maximite design into a small printed circuit boad that conveniently plugs into a solderless breadboard for circuit experimentation. The GCMMSTICK1 is 100% compatible with the maximite firmware developed by Geoff.
Just like the Maximite, the power of the CGMMSTICK1 is the combination of the easily understood but powerful langauge of BASIC and the convenience of electronic interface lines. In short order you can snap a CGMMSTICK1 into a solderless breadboard and interface to circuits with a BASIC program running on the stick. The CGMMSTICK1 has a micro-SD interface for program storage, or for logging.
Twenty I/O lines can be controlled from BASIC and used as basic digital I/O, as SPI ports, as serial ports, as I2C interfaces, and as analog inputs.
Download of Beginning Maximite with the CGMMSTICK1: Beginning Maximite
Australian forum with some support and examples for Maximites: The Back Shed
Download of Maximite Integrated Development Environment: MMIDE
Pin outs for J1:
1 – 3.3V from regulator
2 – VIDEO1
3 – VIDEO2
4 – NC
5 – VSYNC
6 – KBDDATA
7 – +5V
8 – KBDCLK
9 – GROUND
10 – HSYNC
11 – I/O 1
12 – I/O 2
13 – I/O 3
14 – I/O 4
15 – I/O 5
16 – I/O 6
17 – I/O 7
18 – I/O 8
19 – I/O 9
20 – I/O 10
21 – I/O 11
22 – I/O 12
23 – I/O 13
24 – I/O 14
25 – I/O 15
26 – I/O 16
27 – I/O 17
28 – I/O 18
29 – I/O 19
30 – I/O 20
This product is sold and shipped by CircuitGizmos in the US.
It is not Sold, Stocked, or Supported by Dontronics, and can only be purchased directly from CircuitGizmos. That is why the stock level is showing zero.
If you click on the link, it will take you to the sales page, where you will find additional information on US, and world wide shipping.
This is currently the only fully built up, 100% MaxiMite Computer-Microcontroller available on the market, as all others are in kit form.